Cuore® PSL 55 D2

Flexible 2K PU coating, two-colour technique

Description

Cuore PSL 55 D2 is an elastic, self-levelling, UV-resistant resin flooring system that is applied to the floor in two colours. The finish consists of a UV-resistant, transparent, water-based polyurethane top coat.

Cuore PSL 55 D2 is part of the Cuore Design flooring range.

This system is installed seamlessly and feels soft and warm to the touch. The flooring system has a low-maintenance, matt, smooth surface finish.

The system has a thickness that can vary between 2 and 3 mm, depending on the substrate and the necessary preparation.

Areas of application

Cuore PSL 55 D2 is ideal for:

  • Medical sector and healthcare
  • Public buildings: museums, libraries …
  • Commercial buildings: shopping centres
  • Private homes, showrooms, lobbies …
  • Educational institutions and classrooms

Environment and health

This Cuore® system may only be installed by experienced professional fitters who have completed Cuore training.

System properties

  • Matt finish
  • Seamless
  • Comfortable and soft to the touch
  • Low VOC emissions
  • Excellent mechanical strength and wear resistance
  • Easy to clean
  • Endless creativity in patterns and colour combinations
  1. Primer: Cuore EP 1250 or Cuore EP 1950
  2. Scratch coat: Epoxy EP 1250 + GE 100 (Mixing ratio 1:1 to 1:1.5)
  3. Self-levelling layer: Cuore PSL 5450
  4. Top coat (1st coat): Cuore WPT 5450 TM
  5. Top coat (2nd coat): Cuore WPT 5450 TM
  • Base: Polyurethane
  • Colour: RAL and NCS colours
  • System thickness: 2 - 3 mm

The substrate must be load-bearing, dimensionally stable, solid and free from loose particles, dust, oil, grease, rubber marks and other substances that could adversely affect adhesion. The tensile bond strength of the substrate must be at least 1.5 N/mm² (minimum value: 1.0 N/mm²). The compressive strength must be at least 25 N/mm².

Consumption
  1. Primer: Cuore EP 1250 or Cuore EP 1950: 0.250 - 0.350 kg/m² (per layer)
  2. Scratch coat: Epoxy EP 1250 + GE 100 (Mixing ratio 1:1 to 1:1.5): 1 - 1.5 kg/m²
  3. Self-levelling layer: Cuore PSL 5450: 2.7 kg/m² (at a thickness of 2 mm)
  4. Top coat (1st coat): Cuore WPT 5450 TM: 0.100 - 0.120 kg/m²
  5. Top coat (2nd coat): Cuore WPT 5450 TM: 0.100 - 0.120 kg/m²

All values are theoretical and do not take into account additional product required due to the porosity of the substrate, the surface profile or differences in level, nor material losses.

Temperature
  • Product: +15 °C min. / +30 °C max.
  • Ambient temperature: +15 °C min. / +30 °C max.
  • Surface temperature: +15 °C min. / +30 °C max.
Humidity
  • Relative humidity: 80% max.
  • Dew point: watch out for condensation! The temperature of the substrate and of the uncured product must be at least 3 °C higher than the dew point, in order to reduce the risk of condensation or white efflorescence forming on the surface of the applied product.
  • Moisture content of the substrate < 4% (by weight)
Possible installation methods
  • After mixing the 2 chosen colours, combine them in 1 mixing tub and stir a few times with a long trowel. The more they are mixed, the fewer colour clouds there will be in the floor.
  • After mixing the 2 colours, pour them onto the floor separately, side by side or into each other, and create the cloud effects by hand.
  • 90/10 technique: first, 1 colour is applied evenly over the entire surface; a 2nd fitter then walks across the floor in spiked shoes and creates the desired cloud effects with the 2nd colour.