Cuore® PSL 36 Stuc

Coloured polyurethane plaster floor in Stucco Veneziano style, for floor and wall

Description

Cuore® PSL 36 Stuc is a coloured plaster floor applied to floor or wall. It is finished with a transparent, UV-resistant water-based polyurethane top coating. PSL 36 Stuc is part of the Cuore® Design floors range. This system is applied seamlessly and feels soft and warm to the touch. The floor system has a low-maintenance, matt surface finish. The system has a thickness that can vary between 2 and 3 mm, depending on the substrate and the preparation required.

Areas of application

The Cuore PSL 36 Stuc is ideally suited for:

  • Medical sector and healthcare
  • Public buildings; museums, libraries, ...
  • Commercial buildings; shopping centres
  •  Private homes, showrooms, lobbies ...
  • Educational institutions and classrooms 

Environment and health

This Cuore® system may only be installed by experienced professional installers who have completed the relevant training.


System properties

  • Matt finish
  • Seamless
  • Comfortable and soft to the touch
  • Craftsmanlike stucco look, also suitable for walls
  • Low VOC, low emissions
  • Very good mechanical and wear resistance
  • Easy to clean




  1. Primer              : Cuore Ep 1250 / EP 1950
  2. Resin floor         : Cuore PSL 3650
  3. Plaster coat 1         : Cuore MD PU Stuc
  4. Plaster coat 2           : Cuore MD PU Stuc
  5. Top coat           : Cuore WPT 5450 TM


        Base                    : Polyurethane

        Colour                    : RAL / NCS colour range

        System thickness  : 2 - 3mm

        VOC content      : 


    Load-bearing capacity : load-bearing, dimensionally stable and sound

    Cleanliness : free from loose particles, dust, oil, grease and rubber marks

    Adhesive tensile strength : min. 1.5 N/mm² (lowest value min. 1.0 N/mm²)

    Compressive strength : min. 25 N/mm²


Consumption

  1. Primer              : Cuore Ep 1250 / EP 1950                                                     : 0.250 - 0.350 kg/m² (per coat)
  2. Resin floor         : Cuore PSL 3650                                                                       : 2.9 kg/m² (at 2 mm thickness)
  3. Plaster coat 1        : Cuore MD PU Stuc                                                                       : 0.7 - 0.9 kg/m²
  4. Stuclaag 2       : Cuore MD PU Stuc                                                                   : 0,5 - 0,7 kg/m²
  5. Top coat           : Cuore WPT 5450 TM                                                               : 0.100 - 0.120 kg/m² (per coat)

All values are theoretical and do not take into account any additional product needed because of the porosity of the substrate, the surface profile or differences in level, nor material losses, etc.

Temperatures

  • Product                              :  +15 °C min. / +30 °C max.
  • Ambient                           :  +15 °C min. / +30 °C max.
  • Surface                     :  +15 °C min. / +30 °C max.
  • Relative humidity  : 80 % max
  • Dew point                         :  Beware of condensation! The temperature of the substrate and of the uncured product must be at least 3 °C above the dew point in order to reduce the risk of condensation or white bloom on the surface of the applied product.

Moisture content of the substrate 

  • < 4% moisture (parts by weight) Test method: CM method