Cuore® PSL 36 D1

Elastic, self-levelling single-colour polyurethane system with good UV resistance

Description

Cuore® PSL 36 D1 is an elastic, self-levelling  resin flooring system applied to the floor in one colour. PSL 36 D1 is part of the Cuore® Design floors range. This system is applied seamlessly and feels soft and warm underfoot. The floor system has a low-maintenance, matt, smooth surface finish. The system has a thickness that can vary between 2 and 3 mm, depending on the substrate and the preparation required.

Areas of application

The Cuore PSL 36 D1 is ideally suited for:

  • Medical sector and healthcare
  • Public buildings; museums, libraries, ...
  • Commercial buildings; shopping centres
  •  Private homes, showrooms, lobbies ...
  • Educational institutions and classrooms 

Environment and health

This Cuore® system may only be installed by experienced professional installers who have completed the relevant training.


System properties

  • Matt finish
  • Seamless
  • Comfortable and soft to the touch
  • Decorative effect, attractive smooth uniform colour
  • Low VOC, low emissions
  • Very good mechanical and wear resistance
  • Easy to clean




  1. Primer              : Cuore Ep 1250 / EP 1950
  2. Scraping coat  : Epoxy EP 1250 + GE 100 (1/1 tot 1/1,5)
  3. Resin floor         : Cuore PSL 3650
  4. Top coat           : Cuore WPT 5000 CM
  5. Top coat           : Cuore WPT 5000 CM


        Base                    : Polyurethane

        Colour                    : RAL / NCS colour range

        System thickness  : 2 - 3mm

        VOC content      : 


    Load-bearing capacity : load-bearing, dimensionally stable and sound

    Cleanliness : free from loose particles, dust, oil, grease and rubber marks

    Adhesive tensile strength : min. 1.5 N/mm² (lowest value min. 1.0 N/mm²)

    Compressive strength : min. 25 N/mm²


Consumption

  1. Primer              : Cuore Ep 1250 / EP 1950                                                     : 0.250 - 0.350 kg/m² (per coat)
  2. Scraping coat  : Epoxy EP 1250 + GE 100 (1/1 tot 1/1.5)                                    : 1 - 1.5 kg/m²
  3. Resin floor         : Cuore PSL 3650                                                                       : 2.9 kg/m² (at 2 mm thickness)
  4. Top coat           : Cuore WPT 5000 CM                                                               : 0.100 - 0.120 kg/m²
  5. Top coat           : Cuore WPT 5000 CM                                                               : 0.100 - 0.120 kg/m²

All values are theoretical and do not take into account any additional product needed because of the porosity of the substrate, the surface profile or differences in level, nor material losses, etc.

Temperatures

  • Product                              :  +15 °C min. / +30 °C max.
  • Ambient                           :  +15 °C min. / +30 °C max.
  • Surface                     :  +15 °C min. / +30 °C max.
  • Relative humidity  : 80 % max
  • Dew point                         :  Beware of condensation! The temperature of the substrate and of the uncured product must be at least 3 °C above the dew point in order to reduce the risk of condensation or white bloom on the surface of the applied product.

Moisture content of the substrate 

  • < 4% moisture (parts by weight) Test method: CM method